Menu
Installation Guide
Installer Qualifications
Tools & Materials Required
Warning Information
Main Components
Optimal Conditions
Ideal Installaton
Do's & Don'ts GPS
Do's & Don'ts Antenna
Device Battery Powered with Charging Cable
Installer Qualifications
The BeWhere devices should be installed properly after carefully reviewing the installation manual.
- Rechargeable battery plugged with micro-USB
- GPS, Wi-Fi, Temp, Light, Air Pressure, Humidity Sensor
- Thermoplastic Side clips
Tools & Materials Required
BeWhere installation document
- Materials for your chosen mounting method (Harness, Thermoplastic clips) shown below
- Acetone-based cleaner (If installing with double sided tape)
- Clean, absorbent rags and/or towels (If installing with double sided tape)
Thermoplastic Clips
Insert the Thermoplastic clips onto theBeMini tracker (clips are provided in the box) Clips can be hooked onto your asset
Warning Information
WARNING:
Do not mount any device with the antenna side against metal(antenna location shown page 3) Please follow safety precautions for operating and servicing the installation on BeWheredevicesCAUTION:
Re-Tighten any screws loosen during work period Monitor devices frequentlyMain Components
Main Components
Antenna Location (look for the symbol shown below to indicate location)
Optimal Conditions
Optimal Conditions
Network Coverage: RSSI -60 to -100 dBm
- 100 to -120 dBm is average and poor and anything below -120 will result in mediocre/ no coverage and may either not update or stop connecting to the network
Location accuracy: Direct view of the sky (VALID 1 = GPS FIX | VALID 4 = Wi-Fi fix)
- Always should be VALID, if INVALID that means the device cannot connect/see the sky. When INVALID the location is very approximate.
Environment: Temperature operating range of devices
- Very cold and lasting temperatures may cause the battery to drain faster.Normal temperature fluctuations cause battery to drop and come back up.
Ideal Installaton
1. Select a location to mount the device based on our recommendations for GPS/network access.
2. Choose a location where the BeMini is unlikely to be damaged or be knocked off during normal operation.
3. Clean the selected location and make sure the area is dry before mounting the device (cleaning products stated on page 2).
4. Install the Thermoplastic clips on each ends. You can also use zip ties, 3M double-backed tape, or industrial Velcro to mount the Mini.
Make sure BeMini has an unobstructed view of the sky for accurate GPS and optimal network
Do's & Don'ts GPS
Placing the GPS location onto the metal will block the GPSs ability to find the satellite.
This will create inaccurate location and invalid Information being reported.
The BeMini has its best results when the GPS is faced up pointed towards the sky and the antenna is facing away from the metal.
Do's & Don'ts Antenna
Placing the antenna against metal will block the ability to find the satellite.
This will create inaccurate location and information being reported.
The BeMini can be in concealed areas as long as there is no metal that is covering the antenna.
Device Battery Powered with Charging Cable
The BeMini Power Adapter is an installation option. This allows your device to be connected to your asset through a rechargeable cable (as displayed below).
This product works well with powered assets like, Ebikes, ATVs, Gators, Boats, etc.
